I likely won’t keep this frenzied posting pace up, but when my excitement is high and I’m loving it I tend to post, post, post. So: another quick WIP post before I head out to see Birds of Prey.
I’ve never owned a brush this fine. It’s an Army Painter Wargamer: Detail brush, with an oversized triangular handle for a comfy grip, and I love it.
This is the sort of brush I need for eyes!
I picked Moot Green, which pops just as much as I’d hoped it would. Why did I struggle to paint things this small without this fine a brush for so long?
With Scipio off the painting handle, I knocked out a quick Leadbelcher coat on his base (to match my Genestealers; with a brown wash it should come up a treat, just like rusty/weathered metal) — and with that his base coat is done.
Now I’ve got two Terminators ready for shade/wash experimentation.
For today’s painting progress I queued up my favorite work/create album (shit, one of my overall all-time favorites), Nicolay’s City Lights Vol. 2: Shibuya, and sat down with a couple of Terminators.
First up was yesterday’s throne boy, as I noticed I’d missed a couple of spots. I touched those up, then grabbed my new Citadel Painting Handle (paid link), dropped in Brother Scipio, and took it for a spin.
I also switched from painting over a paper towel to using my Gunpla cutting mat. Getting paint on that won’t cause any issues, and when I’m ready to start nipping my Deadzone minis off their sprues and trimming them down, it’s what I’ll be using anyway.
A decade ago, I used putty to affix a mini to a paint pot, wine cork, or other suitable object as a painting handle. It was fine, but always a bit of a pain — and sometimes they fell off. Metal minis in particular would work themselves loose over time.
One of the coolest things about this handle is that working upside-down is a breeze.
I also like that it has two “layers” of base grips built in. I’m using the top layer for Scipio. The bulbous grip shape is also easier on my fingers, which are a decade older too . . .
Like the Citadel water cup (paid link), the handle is one of those things that sounded unnecessary at first but is proving to be quite nifty.
I need to finish up the base edges (and a couple hard-to-reach spots by his feet), and then go buy a pot of “Terminator visor/eye green” and dot those in — but apart from that, he’s fully base coated as well.
Base coat colors, as ever for these guys: P3 Khador Red and Marrow White, GW Leadbelcher, Lothern Blue, and Auric Armor Gold. TDB: green for the eyes.
Having gotten off the assembly line for two miniatures now, I’m 100% happier with this approach (as I speculated might be the case). Sure, it’s less efficient — but given that these miniatures have been in my possession for 11 years, is efficiency really my top concern? Completion is satisfying; seeing real progress in one painting session is satisfying.
I also found myself solidly in the mindful, relaxed yet focused state I talked a bit about in my post on realizing I secretly enjoyed miniature painting — that state of “washing the dishes to wash the dishes, not to have clean dishes,” of enjoying painting for the joy of painting.
Case in point: Brother Scipio, who never met a craft store he didn’t walk out with another yard of locally sourced vellum and a jar of decorative glass gems, is covered in scrolls and jewels. I discovered I love painting the little teardrop-shaped jewels, and I enjoyed taking a deep breath and trying to capture the “tails” of his decorative chest scroll. That feels damned good.
After mulling it over I decided to try what I’d been toying with after my first WIP it good post: getting off the assembly line and just base-coating one Terminator to completion.
I figured I’d pick one of the miscellaneous pieces in Space Hulk, the dead Terminator on the throne — who is used in exactly one mission, I believe — rather than a mainline squaddie so that if my experiment in shading went wrong I wouldn’t have destroyed one of the primary models.
There was one small problem . . .
I have Gehenna’s Gold on hand, which I think I bought as a replacement for some GW or P3 gold that had dried out — whatever I used on the gold accents on my Genestealers (decking bolts, etc.). But it looked coppery, so I tested it on throne boy and yep, that’s copper.
So I made a quick trip to Mox Boarding House, which has a full selection of Citadel paints, to pick up a replacement. You know where this is going, right?
I wound up with the gold I figured would be the right one, Auric Armor Gold, but just in case I also picked up Liberator Gold and an Army Painter option, Bright Gold. Plus Golden Griffon for drybrushing . . . and AP Toxic Mist in case whatever I’d used for my Genestealers had dried out, and a painting handle because it looked useful and I wished I’d had one earlier today, and two very fine brushes (something I don’t have in my arsenal).
Then I got properly tucked in and wrapped this guy right up.
For Future Martin’s benefit I sat him atop his five base coat colors: P3 Khadar Red, P3 Morrow White, and the GW pots of Auric Armor Gold, Leadbelcher, and Lothern Blue.
I’m pretty sure his wax seals and the gems on the throne aren’t supposed to be blue, but red seemed redundant, yellow seemed too likely to conflict with gold, and I don’t have a light green at the moment. I dig the bright blue.
Next I do some reading up on brush shading, pick a couple washes from my Citadel Shade set, and take throne boy to the next level!
Sharing work-in-progress (WIP) pics seems good for motivation and sounds fun, so here’s today’s WIP: finishing the Leadbelcher base coat on the last of my Space Hulk Terminators.
I paint batches of minis like this assembly line-style, so 100% of my Termies have been primed (with Armory white spray primer) and base-coated in P3 Khador Red. All of them have metallic weapons and other shiny bits, so I moved on to GW Leadbelcher next.
I realized I’d forgotten to the little vents in the heels of most of them in Leadbelcher, so I fished out the whole squad to hit them all while I still had the pot open.
That was when I discovered Mister Hammer, who’s in the foreground in the pic above. He’d been tucked into a corner of the Plano box where I’ve been keeping (cough cough mostly storing) these guys and I hadn’t noticed that he still needed a Leadbelcher base coat. Ah well, my eyes are tired now and I’m ready for a break; he’ll have to wait until later, or another day.
I’m also noticing a downside of batch painting vs. completing one model at a time: There are no bursts of accomplishment along the way, as a figure gets finished; instead, it’s one big Tunguska Event of accomplishment all at the end, when 100% of them get wrapped up more or less at the same time. They also look like crap for longer, since every base coat produces a measure of spillover that I won’t fix until I do one final touch-up pass before shading. It still feels more efficient to batch paint, though, but it’s making me wonder if I shouldn’t try switching gears when I get to my Deadzone squads.
One more unrelated observation: This is my first time using this Citadel water cup (paid link), and it’s great. It has a brush rest, a wide base for stability, little striations on the bottom and sides for agitating paint off your brush, and “brush tip-pointing slots” in one side. I wasn’t sure all those bells and whistles would be an improvement over using the giant movie theater cup I’ve used for years (or just grabbing a random mug, etc.), but I used 100% of them in this session and appreciated them all.
Incidentally I think I’m going to preface all my WIP post titles with “WIP it good,” because 1) fuck yeah Devo! and 2) the lyrics to “Whip It” are actually pretty apropos for miniatures painting:
Now whip it Into shape Shape it up Get straight Go forward Move ahead Try to detect it It’s not too late To whip it Whip it good
Devo, “Whip It!”
And in closing, one more stray thought: Today, while holding minis about six inches from my face, I realized it might be time to invest in a magnifier lamp. Another time!