Thanks to a great question from Rogue Prismatic Golem on G+, I’ve updated Hexmancer to version 1.1. This version includes clearer language for the d24 roll, the d20 roll, and the Byways and Waterways section, plus a new logo. (The logo font is Hexatus, by Koczman Bálint.)
I also thought it would be a good idea to share a extended example of Hexmancer in use, so I grabbed the five dice it employs and printed out a sheet of numbered hex paper.
Hexmancer in action
For this example, I made 12 Hexmancer rolls, pausing to draw results on the map between each roll — but first, I seeded the map. I apologize in advance for subjecting you to my “artwork.”
Seed the map of Examplehawk
I added a village to the map, picked a terrain type for that hex (plains), included a trail because I figure the village has to be connected to something, and seeded three rumored dungeons out in the wilderness. (The map appears in Roll 1.)
For purposes of this example, I’m not going to check for random encounters or see if the party gets lost, and I’m not going to create features if any are rolled — I’m just showing you Hexmancer. I’m also actually rolling dice — and not manipulating the results — because rolling dice is fun and I want to use this example as a proof of concept.
The PCs are in the village in hex 1208, which is in a borderlands region of Examplehawk. They decide to check out the rumored dungeon to the south (down). The villagers tell them the trail heads in that direction, so they follow the trail.
Their origin hex is plains, so I look at the Plains column in Hexmancer. A 6 gives me plains as the terrain type for the new hex.
They’re in a borderlands region, and they’re following a trail, so I check the fourth row in the d24 table (the third row is borderlands, the fourth is borderlands while on a byway/waterway). I needed a 1-4 to get a feature, and rolled a 6 — no feature. Because there’s no feature, I ignore the d20 roll.
But I also know the trail continues into the new hex, so I’m going to use Byways and Waterways (Hexmancer, p. 2) to see where it leads. I use option 2 (“Party is following the feature”) and just roll a d5 to see where the trail exits the new hex.
I rolled a 4, so I count 4 hex sides clockwise from the origin side and draw in the trail. It exits into hex 1109, to the southwest.
Here’s the map with my new hex added.
Seeing that the trail seems to be heading in the right direction, the party stays on the trail. (From here on, I won’t show you my rolls, I’ll just list them and show you the map.)
Exiting a plains hex, a 29 gives me mountains. They’re still following the trail and we’re still in the borderlands, so a 10 on the d24 roll doesn’t generate a feature. I ignore the d20 roll again.
Using option 2 in Byways and Waterways, I roll a d5 and get a 2. The trail will exit hex 1109 into hex 1110.
The party presses on, following the trail through the mountains into hex 1110.
Looking at the Mountains column for the d30 roll, a 29 gives me plains. No feature again, so I ignore the d20 roll and move on to the trail. I get a 3 for the trail, so it’s going to exit into hex 1111.
The PCs continues on into hex 1111, still following the trail.
24 on the d30 roll yields hills. 5 on the d24 comes soooo close to generating a feature (needed a 4), but doesn’t. I get a 2 for the trail, so it’ll exit into hex 1112.
(In true “live TV” fashion, starting around this point my phone didn’t actually take a bunch of pictures I thought it had taken. You may notice ghostly terrain in unexplored hexes going forward — that’s me backtracking through the finished map, erasing things so I could retake photos for earlier rolls.)
The party decides to leave the trail and head southwest, straight for the dungeon in hex 1012.
Another 24 on the d30 roll, but since the hex they’re leaving is hills I look at the Hills column: a 24 is plains. No feature, again.
This time they’re not following the trail, though, so I glance at Byways and Waterways again. Option 3 (“Party isn’t following the feature”) notes that I only need to worry about the trail if its origin side connects to the hex they’re entering, which it doesn’t.
The dungeon looted, the party decides to head back to the village, buy supplies, and go for the dungeon in hex 1609, to the east. They follow “known” hexes the whole way, so I don’t need Hexmancer again until they decide to leave hex 1208, the village.
When they leave the village, there’s no trail to follow and they go straight for hex 1308.
Leaving a plains hex, 15 on the Plains column makes the new hex plains as well. A 4 on the d24 roll would have generated a feature on the first four example rolls, but now they’re in borderlands and not following a trail.
They head for hex 1409, to the southeast.
That’s plains, no feature, and ignore the d20 roll.
Not knowing anything else about the map, the absence of a trail leads me to decide that the PCs are now in a wilderness region.
Those rolls give me hills, but no feature.
Hills, no feature (other than the dungeon).
The party makes it out of that dungeon, too, and returns to the village via a known route. The next Hexmancer roll will be made from the village, hex 1208, heading towards the dungeon in hex 0806.
Back to borderlands, no trail, and leaving a plains hex, so that roll gets me a plains hex with no features.
They head into hex 1007.
23 on the Plains column is woods; still no features.
Hex 0906 has a feature! Also, the party is in wilderness again.
The terrain here is swamp, and a 1 on the d24 roll would be a feature in any type of region. I look at the first row on the d24 table (for wilderness, not on a byway/waterway) and see that this gives a -2 modifier to the d20 roll.
With the d20 roll (19) now a 17, instead of a getting a village (the 19 result), I get a castle. I could make one up or pull a pregenerated castle out of any number of books; easy peasy.
At this point I assume the party would decide what to do about the castle (or vice versa!), so I’ll stop the example here.
I rolled up 12 hexes using Hexmancer, including a mix of borderlands, wilderness, on-trail, and off-trail rolls. The average chance of rolling a feature across those four rows on the d24 table in Hexmancer is around 13%, or about 1 hex out of 8. Statistically, my one roll that resulted in a feature is about right.
Is it “right,” though? I’m going to sleep on that, but it seems about right for the style of campaign I had in mind when I designed Hexmancer. There would also have been random encounters, at least a couple checks to see if the party got lost, and the fallout from both of those things.
Features are fun, though, and the balance depends on your specific group and campaign — if you want more features, just change the d24 table. You could also seed the map with more stuff, which I’ll be doing tonight for my DCC campaign, probably to the tune of three or four villages and a similar number of features.
After 12 hexes, I’m also left with some interesting questions — and more importantly, so are the players. For example:
- Where does the trail to the south go?
- Why is there a castle next to a dungeon?
- Why is the castle built in a swamp? (Cue Monty Python reference.)
- What else is out there?
I also see that the terrain in Examplehawk is pretty diverse, but not unrealistically so (at least, not for the value of realistic that I care about for gaming).
Lastly, I should note that it took me much longer to write about each hex here than it did to generate them. After a few rolls, things like “d30 roll under 16 = same terrain” became second nature, and I didn’t even have to check Hexmancer to know the results.
If you have questions or feedback about Hexmancer, I’d love to hear them!
Digging Yore? Check out my book!The Unlucky Isles
], the first system-neutral guidebook for my Godsbarrow fantasy campaign setting, is available in print and PDF.