I appreciate that resin allows GW to keep niche models in profitable, appropriately limited production, but having just built my first two figures — Commander Dante and Chaplain Arrius (“Chaplain with Skull Helmet”) — I have to say that it’s annoying stuff to work with.
It’s flaky, and decidedly more fragile than modern GW plastic kits. It’s prone to bubbles and “frayed” edges. Instead of clear, easily-addressed mold lines it’s studded with flashing from the molding process. And it doesn’t take plastic glue, so instead of near-instantaneous bonds you’ve got to contend with the sloppiness of superglue.
I don’t think the fussiness of resin will keep me from buying more resin figures, but I will think twice before doing it. The sculpts are great, but there’s no joy in the assembly process.
That said, I suspect that once the minor annoyances of assembly are behind me, they’ll prime and paint up just like any of my other figures — and I’ll wind up liking them.
My first 40k tank is also my first completed model in May: Relentless, the designated transport for Squad Karios, 2nd Company. It’s my first partly because it just plain took me longer than I expected, but also because I spent at least as much time assembling minis as painting in the first week or so of the month.
Here are its two golden angles:
And the full lightbox treatment — including my first use of the little hatch in the top of my cube, since this model has a top worth showing on its own.
I’ve mentioned before that there are stages of the painting process when the miniature starts to come alive — the wash makes it look real, the highlights give it life — but with Relentless was surprised to find that that stage was the very last one: the livery. Putting on the decals makes it feel like a vehicle in a larger force, like a part of the Blood Angels chapter. I dig that.
I always forget that “generic” Space Marine kits assume you’re building Ultramarines, so I’ve probably put the gunner’s Cog Mechanicum pauldron on the wrong side. But hey, it’s not like it’s perfect apart from that! Loads of little mistakes abound.
Nonetheless, I’m happy with Relentless and excited to have completed my first 40k tank. I’ve got one more in my current army list, the Land Raider Crusader Judgment, plus a few more in my backlog. Painting them should get a bit smoother every time, and before I know it what seemed difficult on this one will just be routine.
With my Rhino, Relentless, mostly base-coated, it was time to do the hazard stripes before moving on to a second coat of red.
I love hazard stripes, especially how they pop against red, and they make sense for the rear drop-door: “stay clear or this massive slab of Ceramite will crush you and then a 10-man squad of Space Marines will grind you into jelly as they charge into battle.“
I did the hazard stripes the same way I did them on Squad Ultio: two coats of Averland Sunset on the whole surface, cover with Tamiya hobby tape (3mm this time), remove alternate strips, paint those areas Abaddon Black.
I figured the areas with the bolts would be more likely to let paint “bleed” under them if I left them taped (since they prevent the tape from seating fully). By happy accident all three bolts fell on alternating strips.
I recommend skipping the bonus steps I added: “Realize trying to use up the last of the black that’s drying out means you’ve just gobbed on quite thick paint,” and “notice you’ve missed a bit and have to backtrack.”
Like Ultio’s stripes, they’re not perfect. But they’re better than what I can do freehand, and should be fairly easy to touch up when I reach that stage.
After painting down to the top edge, I realized I had no clear demarcation for the bottom edge. I tried a few tape lines that incorporated the door pivot/axle thingie, which is cylindrical and therefore annoying to tape up cleanly, and eventually decided that the bottom edge should align with the bottom of the frame instead.
I thought this would be a piece of cake! So much easier than wrapping a symmetrical pattern around three sides of an object, like I had to on Ultio — right? Narrator: Wrong.
But now I’ve got a pretty good template to use for my next Rhino/Razorback!
I reorganized my pile of 40k kits and my hobby space, and when I was done the simplest option for keeping things tidy seemed to be building the remaining kits for my current 2,000-point Blood Angels army list.
I started with Turiel, a Furioso Dreadnought of the 1st Company. I also built his alternate arm (Furioso Fist and Melter) but forgot to include it in the photo. He got a plain base to differentiate him from Narses, and to give me a blank canvas for creating a little landscape around him.
From there I moved on to my second 40k tank, the Land Raider Crusader Judgment. This thing is huge!
Just as I did with my Rhino, I considered painting the interior but decided to seal it up instead. There’s a ton of detail in there and it’s barely visible through the (totally awesome) front doors — plus, sealing it up gave me some cool spare parts for my bits box, like the engine plate below.
One of my favorite details in the Land Raider kit is that every 13th tread plate is the imperial eagle, so this sentient war machine can stamp the mark of the Emperor on every world where it fights.
In the photo below, Judgment is almost complete. I’m going to leave the foreground items — the pintle-mounted Multi-melta, the twin Assault Cannon, both sponson Hurricane Bolter elements, the lower sponson housings, and the sponson cameras — unglued and paint them as sub-assemblies. I’m not sure yet if I’ll glue the sponson guns or the pintle gun into place, freezing the entire tank into one immobile object, or leave them as moving parts.
It took two full evenings just to build Judgment — and I still have decorations and a hull-top choice to make and add to it. Actually painting this beast feels like at least a two-week task.
After Judgment is assembled, though, it’s on to my final squad, some close-combat Terminators (squad name TBD), and then the two resin characters I currently have soaking in soapy water: Commander Dante and my Chaplain, Arrius.
While painting May’s minis, I’m also building my June models. After my Death Company squad, I decided to tackle more jumpy boys: a squad of Assault Marines.
This is the first time I’ve broken out the bits box to add things to the kit other than basing debris. Everyone’s getting a Blood Angels chapter pauldron, and I’m raiding the greeblies for belt doodads and the like.
As ever, I started with the sergeant, Adamo, and let the character of the squad flow from him. The Eviscerator looks amazing — I’m so glad it’s an option. And the little “leaping into flight” base elements, which come with the kit, are fantastic.
These are great sculpts, too, full of motion and energy — and somehow they manage to convey that, unlike their Death Company brethren, they’re in full command of their faculties. Compare:
Maybe it’s just me? I don’t know. But I see it and I dig it.
This kit is loaded with options, including separate backs, torsos, and backpacks to use if they’re not Jump Pack-equipped; loads of melee and ranged weapons; and a surprising amount of belt bling. I’ve got another box of them in the wings, and I can’t wait to dip into some of the other options — with an eye to intermingling the guys without knee pads between squads (provided I remember to give them the special weapons…).
This past weekend I found myself in a funny spot: Excluding Commander Dante, who’s still on his sprue (I’m not ready to mess with resin quite yet), 100% of my other models to paint this month were drying or curing and couldn’t be painted…but I was in the mood to do hobby stuff.
My backlog has now grown to the point where even if I build my entire current army list, I won’t be short of other things to build when assembly is what I’m in the mood to do with my hobby time — so I started in on my June painting queue. Specifically, Death Company box.
As always, I started with the leader — except that by the rulebook, Death Company battle-brothers don’t really have one, at least not within their squads. They’re generally led by a Chaplain who can manage them on the battlefield. So what to name this squad?
I decided that it would be Squad Zahariel, in honor of former Sergeant Zahariel, a noble and long-lived Space Marine who had fallen to the Black Rage.
I knew I wanted these guys to be leaping into flight — like the Assault Squad, which includes cool little base add-ons that give them some lift — so I dipped into my bits box and came up with some scrap that would work. (Two pairs of legs are posed standing squarely on the ground, so I didn’t mess with those.)
Finding the right pieces, matching them up to the right poses, and making it all work was a lot of fun. I love this aspect of assembly, and even though it’s quite light as kitbashing goes I have to start somewhere. Baby steps!
I also managed to glue 4/5 of their jump packs on, and let their glue set for several hours, before realizing that I’d placed them about 1-2mm too low. With some wrenching and a bit of surgery I managed to sort them out, and any evidence of my screw-up is well-hidden deep in the crevice between back and pack.
This is a great kit, loads of fun to assemble, and it includes a wealth of options, doodads, extra shoulder pads, and awesome Chainswords. I’d gladly build a few more of these boxes.
I finished listening to the audiobook of The Devastation of Baal last week, and then over the weekend — while naming my Sanguinary Guard — realized that I now know something else about my Blood Angels army. Before that I had two bits of lore/flavor around my army:
They all wear helmets, no bare-headed models
Their bases are meant to be the plains of Armageddon
To which, because of the events of the Devastation, I can now add:
My army is post-Devastation of Baal, because it includes both Primaris and non-Primaris Marines
Lore-wise I might be getting a bit fuzzy here, because the only info on post-Devastation Sanguinary Guard — all but one of whom died fighting Leviathan — is on 40k wikis, but that points to the Guard being composed of the lone survivor and Primaris Marines. I see no reason the new Guard can’t be composed of a mix of Primaris and non-Primaris, though, so that’s what I’m going with in my head.
Prepping my May minis
I also found myself on May 1st without a single ready-to-paint model, so I set about getting a few to that stage. That entailed doing the texture paint on Squads Amedeo and Dolos, and priming my Rhino, Relentless.
I soon realized that properly priming Relentless was going to be a two-day job. For day one, I did the undercarriage and both ends; it then sat overnight to allow the primer to cure.
On wings of frustration
As I was listing my May 2020 BGG painting challenge minis, I realized I couldn’t put off figuring out how to name my squad of Sanguinary Guard any longer. They have no sergeant; to the best of my knowledge, Space Marine squads are traditionally named after their sergeant. That’s how I’ve done all of mine.
But these guys are weird. The unit is four, often accompanied by an Ancient — but he’s not part of the squad. He’s a character, he gets a name; that’s Brother Abaoz. But the rest? It seems easiest to name them all and pick the one I like best as the nominal squad leader (since the actual squad leader is Commander Dante): Remiel, Uriel, Zarnaah, and Ballaton.
Squad Remiel rolls off my tongue the best, so Squad Remiel it is. They’re all angel names, which I found by Googling “angel names.” As always, I bounced them off Lexicanum’s list of known Blood Angels names so as to be reasonably sure I’m not claiming someone who already has a place in the lore. (Emphasis on reasonably; I’m going to overlap at some point, it’s almost inevitable — and that’s okay.)
Their wings, though? Most frustrating thing I’ve glued in my two months of building 40k minis. There’s no “mating” joint, no locking nub, nothing to ensure that the wing is in the correct spot and matches its partner. The instructions imply where they go, but even with the angled 360-degree spinning model on GW’s site I still wasn’t totally confident.
It took me 45 minutes to do Remiel, and most of that was his wings. And every time I’d adjust them, his awesome sword-arm pose would slip because of his huge pauldron, and then the other wing would get bumped, and then…
The outcome, though, is a straight-up badass pose. Brother Remiel is winding up for a death blow while leaping into the sky, all motion and dynamism. His wings don’t quite match, and that gap at his right shoulder is going to require a healthy amount of Agrax Earthshade to cover up — but this is a great sculpt, and he should look awesome when he’s painted.
I returned to Squad Remiel on Saturday, armed with a new approach: I came prepared to relax, which sounds funny but can be quite effective; I built in a pause between gluing on their arms and wings, to make sure the arms were fully set; I test-fit the wings before the glue on the arms and pauldrons was dry, so I could nudge them around a bit before it was too late; and I checked both wings from every angle before their glue was fully set, leaving time for delicate adjustments to them as well.
The end result is one of the coolest squads I’ve built so far. I absolutely love these guys. Whereas after building Remiel I was kind of glad I only had one box of them, with the squad done I certainly wouldn’t mind doing another box. Their details, their dynamic poses, the massive melee weapons — I was drawn to them way back when I was choosing a Space Marine chapter, and now I remember why.
Yore also hit a fun little milestone, one I’ve been watching for since I got back into blogging this past February: 500 impressions in a day.
Thank you for reading Yore! I write it because I want to, but I like knowing that folks are reading it — and hopefully getting some mileage out of it, too.
Last night saw Squad Ultio, my first Terminator unit, through to completion. A big part of my motivation to finish these guys in April was my entry in BGG’s monthly painting challenge; once I added Ultio to that list, I was going to do my level best to finish them.
Incidentally, I looked up the proper first layer color for an Averland Sunset base and it’s not Flash Gitz Yellow (as I’ve been doing on Ork scrap on my bases) but Yriel Yellow, so that’s what I’ve used to highlight my hazard stripes. No other color surprises on these guys.
With their 40mm bases they’re a bit much to try to fit into my tiny lightbox, so here are a couple close-ups of the squad in two parts.
Gotta grab an army shot, too. I’m up to 553 points now!
I built my first Blood Angel, Sergeant Karios, on March 10, so this represents about seven weeks of work.
Drinking, writing, and a brush
Along the way, I nearly made a catastrophic mistake:
I also tried a new tool, and a nerve-wracking experiment — both hard to make out given the terrible photo (though easier to spot in the lightbox shots above) — and wrote ULTIO on the banner and BAAL on a pauldron in Gundam marker:
I did learn that if I brush on varnish over the marker, it’s going to rub it out at least partially. I touched up the ULTIO, but it didn’t come out as crisp as it was before. Note to self for next time: dab it on, rather than brushing.
And, as a first follow-up to my long post about brushes, I tried the first of my new Princeton Velvetouch brushes, the 10/0 Liner. After 5-6 hours of layers and highlighting work, the extraordinarily fine tip of this synthetic brush…still looks like it’s brand new.
That’s incredibly exciting, as I’d despaired at the prospect of finding synthetic brushes that could match the quality of animal hair; these look like they’re going to deliver. Comparing this $3 brush to any of my $1 ZEM brushes, which curled in the first few minutes of use, the price difference is absolutely worth it (although crappy brushes also have their uses!).
I also have two rules for all new detail brushes: no metallic paints, and brush cleaner at the end of every session. (That second rule goes for all of my brushes, now.) Those seem to make a big difference!
My painting queue for May through July is just as ambitious (by my standards) as April’s, with 16 + 1 tank on the docket for May and 17 + 1 Dreadnought + 1 large tank for June. I may not hit them both, but I’m painting for the joy of it and joy doesn’t care what month it is.
Which is good, because as of this post’s publication date my family is on day 50 of pandemic isolation/lockdown, and time has become a meaningless smear of present. Stay safe out there!
Since I started my Blood Angels army in March of this year, I’ve had bits scattered across little baggies, the boxes in which they came, other boxes…it was mess. The other night I wanted to add a couple purity seals to my Rhino before priming it, which entailed looking in like eight different places, and in the end I found only one of the three spares I had.
This is a Plano 3700, one of their larger boxes. It probably incorporates more dividers than actually came with it, because I have oodles of Plano boxes of various sizes scattered about the place. (I use them for everything, but especially for board game organization.)
I have bits from non-Space Marine kits for basing, plus the odd thing like Skitarii heads that I use for conversions, but essentially this whole box is for my Blood Angels. There’s no magic to my system, and it will absolutely change as I build more kits, but here’s how it’s organized at the moment (left to right):
Top row: helmeted heads, bare heads, winged blood drop shoulder pads, other shoulder pads, torso fronts, torso backs and backpacks
Second row: single arms/hands and melee weapons, Bolt Pistols and Boltguns, special and weird weapons, heavy weapons, Terminator bits, miscellany (grenades, Iron Halos, belt bling, etc.)
Third row: Primaris heads, Primaris single arms, Primaris bling, Primaris doodads and weapons, parts from vehicle kits
Bottom row: small basing debris, medium basing debris, large basing debris, actual bases
Notably absent, although I have an abundance of them, are arms. This is because they often come in pairs, so 63A goes with 63B, and the easiest way for me to not mess them up is just to leave them on their sprues in their original boxes (which I’m keeping, along with the empty sprues for future use as clutter, etc.).
Once it was all in there, I learned some things. For example, I thought I was low on BA shoulder pads and had considered buying another upgrade kit to get some more — but I have like 20 of them.
It feels good to have a proper bits box in place at last.
Narses has been sitting on my desk, fully painted save for one tiny bit of highlighting in a single color, for several days now. But that last color (Baharroth Blue) finally came, and with that done I could varnish him, glue on some tufts, and add him to my Blood Angels army.
I think the above is his “golden angle,” but let’s give him the full four-way lightbox treatment, too.
Here he is leading my other troops. There aren’t that many of them yet, but the next couple months should see about three dozen more added to my strike force.
He was a lot of fun to paint — which is good, because my current list features a Furioso Dread and I have a Death Company Dread, two Redemptors, and two “almost a Dreadnought” Invictor Warsuits in my backlog! Ditto his scenic base, which was the largest I’ve ever done.
Having worked with the pre-molded Dreadnought base, though, I don’t think I want more of them in my army. I Ebayed a couple 60mm plain bases to use for my other two (and the Redemptors/Invictors come with plain bases), which will make Narses’ “hero base” a nice contrast.